Sugar Land · 77478

Appliance Repair in Sugar Land, TX 77478

Ice maker, washer, gas oven and dryer repair across Sugar Land's 77478. Share the brand and model, and we'll get your visit on the books.

Glass being filled with ice at a refrigerator door dispenser

Ice Maker and Washer Fill Code Repair in Sugar Land

Sugar Land's Main System serves the city east of the Brazos River, where 77478 lies. Its water is a blend of surface water from Oyster Creek and the Brazos with groundwater from 14 wells that average 1,250 feet deep. The city's 2025 water quality report puts the Main System's total hardness at 104 mg/L, which works out to about 6.1 grains per gallon.

Even at that level, minerals build up over years on the fine screens and valves where water enters a refrigerator, a washer or a dishwasher. That's where the symptoms start. A scaled inlet screen slows the ice maker until the bin can't keep up.

Washers show it as a fill code. On Whirlpool front-loaders a slow fill reads F8 E1, on LG it's IE, and on Samsung 4C or 4E. Each brand's first check is the same: water on, hoses not kinked, and the inlet screens clear. If those are fine, the inlet valve itself may be failing, a $100 to $300 washer repair nationally.

Glass of ice water on a kitchen counter by a sunny window

Is My Sugar Land Subdivision in 77478?

We placed the center of each section on the City of Sugar Land's subdivision map into the Census Bureau's 2020 ZIP areas. Streets at the edges can differ, so the ZIP on your address decides it.

Inside 77478
Barrington Place, The Highlands, Ashford Lakes, Sugar Lakes, Plantation Bend, Sugarwood, Creekshire, Plantation Colony, Belknap, Magnolia Plantation, Brookside, Oyster Point, Hall Lake, Alkire Lake, Oyster Bay and Eldridge Lake
Nearly all inside
Sugar Creek and Lake Pointe
Housing age
Median build year about 1988; more homes here date from the 1980s than any other decade

Appliance Hookup Repairs in Older 77478 Homes

A house from 1988 is older than the industry life estimate for every major appliance in it. The supply hoses, the box valves, the gas stub and the dryer duct are another story, and the visit looks at those along with the machine.

Washer fills slowly or stops with a fill code

Whirlpool says fill hoses should be replaced every five years, and box valves in an older laundry wall may not open all the way anymore. The tech checks the supply side before condemning the inlet valve.

Gas oven igniter glows, but the burner never lights

On many gas ranges the bake igniter has to reach a set strength before the gas valve opens, and a weak one glows without getting there. A gas oven igniter runs $150 to $325 installed on national averages. The gas oven and range repair page covers valves, sensors and boards.

Dryer needs two runs to dry a load

The tech checks the lint path and the duct before pricing parts. A blocked vent is the usual reason a thermal fuse blows. A heating element runs $150 to $350 installed nationally and a vent cleaning $80 to $185. More on the dryer repair page.

Dishwasher runs long and leaves dishes dull

Whirlpool wants water at 120°F as it enters the dishwasher; cooler water makes the machine pause to heat and stretches the cycle. When the water heater sits at the far end of the house, the water arrives cooler and the pause gets longer. A heating element repair runs $200 to $350 nationally if the heater has quit.
Washer outlet box with hot and cold valves and a drain standpipe behind a pulled-out washer

Is Your Older Fridge Worth Repairing?

The city won't take a refrigerator or freezer from the curb until its refrigerant is removed, which adds a step to replacing one.

Consumer Reports' rule is to stop at half the price of a new unit. A new refrigerator runs $675 to $2,500 nationally. The repair or replace guide works through the same test for each appliance. Book the visit first and you'll know what the repair involves.

Nearby Coverage and Repair Pages

Sugar Land Appliance Repair Questions

I live in First Colony. Am I covered?

If the ZIP on your address is 77478, yes. First Colony is big enough that neighbors can have different ZIPs, so go by your own address. Don't see your ZIP? Call anyway and we'll check your address.

Why does my ice maker take so long to fill the bin?

A clogged water filter or a scaled inlet valve is the usual cause. Either one cuts the water reaching the ice mold, so batches come out small or late. Tell us when the filter was last changed.

Is a 15-year-old gas range worth fixing?

It can be. Gas ranges carry the longest industry life estimate of the major appliances, about 15 years, and an igniter or safety valve is a modest repair at $150 to $325 or $150 to $400 installed nationally. Hold the written price against half the cost of a new range.

What should I tell you about a washer fill code?

The brand, the model and the code exactly as it shows, plus roughly when the fill hoses were last changed. If the cold side fills fine but the hot side crawls, say so. That points the tech at one valve or screen instead of both.

What hardness should I enter in my dishwasher settings?

Start at about 6.1 grains per gallon on the Main System, which serves 77478. The city's 2025 report lists 104 mg/L. Its water page also gives a 2.0 to 16.4 gpg range as the blend shifts, so raise the setting if spots keep showing.

Call for Appliance Repair in Sugar Land

The tech checks the filter and the inlet valve, then hands you the repair price in writing to approve. You only pay for work you agreed to.

Call (713) 379-8612